PRO-BLUE ALKALINE BASED COIL CLEANER - 1 GALLON

| Features: | Cleans and brightens | Vigorous foaming action | Non acid formula | Benefits | Leaves the coil clean and bright equal to or better than traditional acid formulations. | Rapidly penetrates and loosens soil. Expanding foam extends contact time and lifts soil located deep within the coil. Foam and dirt are easily rinsed with water. | Does not contain hazardous hydrofluoric acid. The product is non fuming and is non corrosive to ferrous metals. | Application: | Pro-Blue is a specially formulated, non-acid foaming condenser coil cleaner. Pro-Blue is blended with aggressive cleaning agents, detergents and rinse additives to provide thorough cleaning with easy rinsing. Pro-Blue restores coil appearance and efficiency. | MIX RATIO: | 1:3 Mix 1 part Pro-Blue with 3 parts water. | Directions: | 1. For outdoor use only. Wear protective goggles and gloves. Avoid breathing spray mist or vapors. | 2. Apply with a chemical resistant sprayer adjusted for coarse spray to minimize misting. | 3. Mix one part Pro-Blue with three parts water to achieve maximum foaming and soil lifting action. For moderately dirty or greasy condenser coils, Pro-Blue is effective when mixed with up to ten parts water. | 4. Shut system off, then spray the Pro-Blue solution into the coil fins from the bottom up. | 5. Allow three to five minutes to achieve maximum foaming and cleaning, then thoroughly flush the surface with clean water. After use, thoroughly rinse sprayer with clean water. | 6. Return the system to service.