PRO-RED+ NON-ACID CONDENSER COIL CLEANER, 1 GALLON

| Features: | Cleans and brightens | Vigorous foaming action | Non acid formula | Benefits: | Leaves the coil clean and bright equal to or better than traditional acid formulations. | Rapidly penetrates and loosens soil. Expanding foam extends contact time and lifts soil located deep within the coil. Foam and dirt are easily rinsed with water. | Does not contain hazardous hydrofluoric acid. The product is non fuming and is non corrosive to ferrous metals. | Application: | Pro-Red Plus is a complete, non-acid foaming cleaner and brightener for condenser coils. Pro-Red Plus will loosen even the most stubborn soils and allow them to easily rinse away. This highly alkaline solution makes cleaning condenser coils fast and easy. | MIX RATIO: | 1:3 Maximum Foaming and Soil Lifting : Mix 1 part Pro- Red Plus with 3 parts water. | 1:10 Moderately Dirty or Greasy: Mix 1 part Pro-Red Plus with 10 parts water. | Directions: | 1. For outdoor use only. Wear protective goggles and gloves. Avoid breathing spray mist or vapors. | 2. Apply with a chemical resistant sprayer adjusted for coarse spray to minimize misting. | 3. Mix one part Pro-Red Plus with three parts water to achieve maximum foaming and soil lifting action. For moderately dirty or greasy condenser coils, Pro-Red Plus is effective when mixed with up to ten parts water. | 4. Shut system off, then spray the Pro-Red Plus solution into the coil fins from the bottom up. | 5. Allow three to five minutes to achieve maximum foaming and cleaning, then thoroughly flush the coil with clean water. After use, thoroughly rinse sprayer with clean water. |6. Return the system to service.