Maintenance & Repair Supplies

MARSHALL EXCELSIOR HIGH PRESSURE ADJUSTABLE REGULATOR WITH WRENC

Price Unavailable

The MEGR-164 Series adjustable high-pressure regulators offer a wide selection of available pressure ranges. High pressure regulators are typically used to reduce tank pressure to an intermediate pressure for use by another regulator. They may be used as high pressure regulators on distribution systems when used in conjunction with first-stage down stream regulators. When equipped with an integral relief valve (MEGR-164SR Series), the regulator may be used as a final-stage regulator on high pressure systems. It may also be used as a first-stage regulator when set at 10 PSIG (0,69 bar) or less. The 1/4”-inch FNPT tapped side outlet can be used to install a pressure gauge or a hydrostatic relief valve. This series contains brass materials thatare not compatible with anhydrous ammonia service. | Adjustable/PSI Type | 250 PSI Max. Inlet Pressure | 1/2” FNPT or 3/4” FNPT Inlet Connection | 1/2” FNPT or 3/4” FNPT Outlet Connection | Gray Urethane Exterior Finish | Steel Regulator Spring | Stainless Steel Stem Guide/Disk Holder | Fabric Rienforced Nitrile (NBR) Diaphragm | Cast Aluminum Bonnet / Body Material | Non-Relieving Vent

  • Model: 136420
  • Shipping Weight: 1.5lbs
  • Manufactured by: MARSHALL EXCELSIOR COMPANY


Your IP Address is: 54.89.70.161

Copyright © 2024 ALL SOUTHERN SUPPLY. Powered by Zen Cart
Parse Time: 2.155 - Number of Queries: 5934 - Query Time: 1.27899913049
South Florida, Fort Lauderdale,Pompano Beach, Hollywood, Pembroke Pines, Weston, Davie, Coral Springs, Plantation, Tamarac, Aventura